SPECIFICATION
Hub connectors
Source Inputs: RJ45
Zone outputs: RJ45
Serial RS-232: 9-D female
Ethernet: RJ45
12VDC input: 2.5mm power jackZSR-100 Receiver connectors
Cable: RJ45
Signal outputs: RCA phono
Infrared input: 3.5mm mono jack sktIndicators
Power ON: Blue LED
Status: Green LED
Ethernet link: Yellow LED
Ethernet activity: Orange LED
Both Ethernet LED’s are integral within the Ethernet connector.Video Inputs (Hub)
Format: Composite
Standard: PAL (standard)
NTSC (factory option)
SECAM (factory option only available on hub without OSD)
Level: 1Vp-p nom. Composite
Impedance: 75 ohmAudio Inputs (Hub)
Level: 5Vp-p maximum
Impedance: 10K ohmVideo Outputs (ZS-100)
Level: 1Vp-p nom. Composite
Impedance: 75 ohm
.
Audio
Outputs (ZSR-100)
Level: As inputs
Impedance: 51 ohm
Performance
Video
Bandwidth: 10MHz (3dB)
Diff. phase: <0.1°
Diff. gain: <0.1%
Audio
Bandwidth: 30Hz—20kHz (3dB)
Gain: Unity
RS-232 Serial Port
Format: 9600,n,8,1
Protocol: <ZxxSyy> where Zone xx is changed to show Source yy
Ethernet data 10/100 Base-T
Power (Hub)
Voltage: 12V.d.c.
Current: 1A (fully loaded)
+125mA per CCTV camera (2 max.)
Environmental
Operating Temp. 0-45ºC
Storage Temp. -20°C to +70°C
Relative Humidity: 0-90% (non-condensing)
Physical
Dimensions (mm):
Hub 222(W) x 134(D) x 43(H) excluding connectors & ears
Weight:
Hub 650g
ZSR-100 70g
